Connecting To An Audio System; Method 1 Connecting To An Hdmi Supported Av Receiver; Method 2 Connecting To An Av Receiver With Dolby Digital Or Dts Decoder - Samsung BD-E6100 Bedienungsanleitung

Connections

Connecting to an Audio System

You can connect the Blu-ray player to an the audio system using the method illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
• Best quality (Recommended)

Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder

• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the product
to the Digital Coaxial In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
16
|
English
02231C-BD-E6100-XN-ENG.indd 16
Method 1
Audio
Method 2
Audio
2012-04-30 오후 5:58:30