AUDAC WX502 Bedienungsanleitung Seite 2

Warning
 Only use the correct amplifier output voltage and impedance. Exceeding these limits could
cause fire or other failures.
Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles.
 Only install the speaker in locations that can structurally support the weight of the speaker.
Not doing so may result in the speaker falling down.
 Do not use any other method than specified to mount the speaker. If extreme force is applied
to the speaker, the speaker could fall down.
 Attach a safety wire to the speaker when it's mounted high above the ground. Failure in doing
so could cause the speaker to fall down for any reason.
 Avoid mounting the speaker in locations exposed to constant vibrations. The mounting points
can be damaged by excessive vibrations, potentially causing the speaker to fall down.
Caution
 Avoid electric shocks: switch off the amplifier power when connecting the speaker.
 Avoid installing the speaker in locations exposed to solvents, acids, smoke and heaters, as
excessive exposure to these factors could result in speaker failure, fire or electric shocks.
 Do not operate the speaker for an extended period of time at distorted sound. This could
cause (irreparable) damage to the speaker.
 Do not stand or sit on, nor hang down from the speaker as this may cause failure of the
speaker.
1