Standard Settings; Change Language; Button Sound; Clock Display - Siemens LC 958BA90 Gebrauchsanleitung Und Montageanleitung

Standard settings

NOTE

Change language

Set time

Button sound

Clock display

NOTE
32
Before switching on the appliance, always follow the
instructions and warnings in the chapter entitled "Safety
instructions".
If required, set the language for the text display.
German has been preset.
The changes to the standard settings will not take effect until
the extractor hood has been switched off.
Each change can be saved by holding down the t button or
deleted by pressing the
1. Hold down the t button for approx. 3 seconds. The
"Standard settings" menu is opened. The "Language"
settings area is lit.
2. Set the language with the rotary selector.
3. Press thet button to switch to the next settings area.
The "Set time" settings area is lit.
1. Set the time with the rotary selector.
2. Press the t button to switch to the next settings area.
The "Button sound" settings area is lit.
1. Switch the button sound on or off with the rotary selector.
2. Press the t button to switch to the next settings area.
The "Clock display" settings area is lit.
1. Switch the clock display on or off with the rotary selector.
Please note that when the clock display is switched off, there
is no display either when the extractor hood is in an idle state
or in operating mode.
2. Press the t button to switch to the next settings area.
w
button.