Parts Of The Machine; Before The First Use - Szarvasi SZV-611 Gebrauchsanweisung

EN

Parts of the machine

1. Painted metal housing
2. Cap screw with security valve
3. Position of the glass jar
4. On/Off button of the machine with control lamp
5. Adjusting screw of steam blow-off
6. Steam blow-off pipe
7. Grip holder for the bayonet joint filter holder
8. Filter for coffee for 2 or 6 persons (for both types)
9. Filter for coffee for 10 persons (only for SZV-618)
10. Filter holder
11. Glass jar with lid
12. Dosing spoon
13. Blind filter

Before the first use

1. Wash all removable parts thoroughly with warm water.
2. Then pour at least 3 cups of water into the percolator and brew without adding coffee, in
order the machine is flushed properly. During the flushing process the flow rate of water
inside the machine is high, therefore excess flow may appear at the top of the filter holder.
This is normal. The effect stops automatically when operated as normally with coffee.
3. The quality of the ground coffee greatly influences the process of coffee making (less and
lower quality coffee is made), therefore, carefully choose the right quality coffee.
4. Before starting to make the coffee, check that the cap screw and the filter holder are closed
tightly. (see the figures)
5. Use the glass jar solely for making coffee, warming on open fire may only be done at
your own risk.
6. Before making another coffee, please wait until the machine fully cools down, then remove
the cap screw and the filter holder.
8