Important Safeguards - Team ZB 1 Gebrauchsanleitung

Fax +32 2 359 95 50

OPERATING INSTRUCTIONS
UK

IMPORTANT SAFEGUARDS


Please read these instructions carefully before using the appliance.

Never use accessories which are not recommended by the producer. They could constitute a
danger to the user and risk to damage the appliance.

Only use the appliance for domestic purposes and in the way indicated in these instructions.

Never let the children use the appliance when the brush head is not placed on the power unit.

Never immerse the appliance in water or any other liquid.

Do not set up the charging base on the edge of a sink, a bath or a shower.

Never use the appliance near hot surfaces.

Before plugging in the adapter, check that your mains voltage corresponds to that of the adapter.
Never use any other adapter than that supplied with the appliance. Never use the adapter for any
other purpose.

Do not use the appliance if the adapter or its cord is damaged. The adapter is not repairable, it
has to be returned to the seller during guarantee period or thrown away when the guarantee has
expired. In that case it has to be replaced by an identical model.

Never use the appliance with its adapter outside and always place it in a dry environment.

When you decide to dispose of the appliance, make sure to remove the battery and to dispose of
it in an ecological manner by handing it in at a place destined to this end
UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)
This product comes with a sealed transformer, whose wiring is described below. It is not a home
serviceable item.
This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp plug is
used, it should be fitted with a 3 amp fuse. The wires on the power cord are colour coded:
blue = neutral, brown = live.
The blue wire must be connected to the terminal marked N or coloured in black.
The brown wire must be connected to the terminal marked L or coloured in red.
WALLMOUNT
Put the screws and rawlplugs provided onto the wall. Then slide the charging unit downward onto the
screws. Guide the cord from the cord compartment between the wallholder and the charging unit.
Use only as much cord as you need to reach the socket.
CONNECTING

The charging unit can be connected to a conventional powerpoint- between 230-240 volts ac (-).

Place the rechargeable power unit, facing the front onto the charging base.

The green charge indicator will light up, when the power unit is inserted on the plugged-in
charging unit.

The power unit may warm up somewhat during recharging. This has no significance on the
unit's operation. Overcharging is impossible.
Generated by Unregistered Batch DOC TO PDF Converter
2011.3.804.1511, please register!
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International
BELGIUM. The page must reproduced and folded in order to
obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).
The page must be folded in order to keep the good numbering
when you turn the page of the I/B . Don't change the page
numbering. Keep the languages integrity.
Assembly page 7/25
7