Seat Height - Haider 350 iQ E Meetingж 360 iQ E Meeting Bedienungsanleitung

Seat Height

1
Adjust the height of the seat surface according to the height to the hollow
parts of your knees. Your upper and lower leg form a right to slightly open
angle. Your feet are flat on the floor – without pressure on the upper thighs.
Lowering the Seat
While sitting on the chair, pull the operating element
lease it at the desired position. Please pay attention to the risk of getting
trapped in the foot section.
Raising the Seat
Lightening the load on the seat, pull the operating element upward
and release it at the desired position.
Please note: The gas spring for seat height adjustment is equipped with a
readjusting device, i. e. after standing up the chair gets back in its original
position.
1
1
1
upward and re-
1
english | 12
Device for Pelvis Balance
The device for pelvis balance allows you a harmonic adjustment of the seat
surface to different positions. This motivates you to sit actively with an open
angle, thereby promoting the stabilization of your back muscles.
Device for Pelvis Balance with Permanent-Contact Mechanism
Seat and back
2
weight to the front or to the back and the seat surface tilts correspondingly.
Further operation is not necessary.
1
2
automatically follow your movements. Simply shift your
2
english | 13
2