General Information; Introduction; Main Characteristics - RAM Audio 6000 Bedienungsanleitung

General Information

1.1 Introduction

The V Series devices feature two or four
channel models, ready for rough han-
dling in the touring world. For this pur-
pose, V Series amps implement over-
sized high efficiency regulated power
supply with PFC front end to deliver
their full performances independently of
mains status. This together with over-
sized high efficiency audio power
stage, forced front to back cooling
through a component-free path with
removable front panel dust filters,
improved rugged mechanical design
with even weight distribution, full digital
control from LCD display on the front
panel... Resulting in: just power, reliabil-
ity and robustness for your touring
gigs!

1.2 Main Characteristics

• PFC QuantaPulse ™ Regulated Dual
SMPS
• Digital Control with extra large LCD
display user interface
• Channel Temperature and Output
Level Monitor in the LCD
• USB port for firmware update and
DSP control
• 25 position Gain, Bridge mode, Input
Links and ICL, front panel config-
urable
• Digital Potentiometers with Encoder
control
• RAM Audio Power Management
System
• Hi Efficiency, Heavy Duty Audio Power
section for extreme use
• Easily removable front panel dust fil-
ters
• Industry standard Neutrik
® XLR and
Speakon ® connectors
• Optional low latency 24bits 96kHz
high performance DSP with post-DSP
signal links and Ethernet control. It
features up to 70 meters input delay.
• Optional EtheRAM II Ethernet monitor
and control system
• Optional EtherSound™/CobraNet™
audio transport and AES/EBU Digital
input
Allgemeine
Anweisungen
3
Informations
Générales