Using The Appliance - Melissa 16770032 Anleitung

• Check regularly that neither cord nor plug
is damaged and do not use if they are or if
the appliance has been dropped in water or
damaged in any other way.
• If the appliance, cord or plug has been
damaged, have the appliance inspected
and if necessary repaired by an authorised
repairer. Never try to repair the appliance
yourself. Please contact the store where
you bought the appliance for repairs under
the guarantee. Unauthorised repairs or
modifications to the appliance will invalidate
the guarantee.
KEY TO THE MAIN COMPONENTS OF THE
APPLIANCE
1. Removable neck support
2. Back rest
3. Straps
4. Seat
5. Control unit
6. Connecting point on appliance
7. Storage bag for control unit
8. Mains adapter
9. 12 V power connector
10. 12 V power adapter
11. Power connector
a. Power indicator
b. Person symbol with 3 position indicators
c. Intensity indicator
d. "Upper" button (upper back area)
e. "Lower" button (lower back area)
f. "Full" button (entire back area)
g. ON/OFF button
h. "Pulse" button (change side)
i. "Tapping" button (intervals)
j. "Wave" button (increasing intensity)
k. "Intensity" button (intensity)

USING THE APPLIANCE

Using the massager gives a relaxing, pain-
relieving and stimulating effect on the muscles.
The 4 massaging rollers provide shiatsu (2) and
rolling massage in the back, and the strength is
adapted to the muscular structure. Moreover,
the vibrations in the seat (4) relax and prevent
sore muscles. The massing rollers have built-in
infrared heat.
1. Place the appliance on a chair or car seat
and tighten the straps (3) to the back of the
chair or car seat.
o We recommend detaching the
detachable neck support (1) when using
the appliance on car seats in order to
achieve safety.
o For safety reasons, we recommend that
you DO NOT use the appliance while
driving, since the appliance's vibrations
can be distracting.
2. Connect the power connector (11) on the
supplied mains adapter (8) to the connection
point on the appliance (6). Plug in the mains
adapter and switch the power on. The power
indicator (a) on the control unit (5) will start
to flash to indicate the appliance is on.
o If the appliance is in the car, you must
connect it using the supplied 12 V power
adapter (10) to the car cigarette lighter
plug.
19