Bestron AHH1200 Gebrauchsanweisung Seite 16

operAtion - general
The appliance is intended
only for domestic use,
not for professional use.
1. Swing function button
2. Button heater above
3. Button heater below
4. On / off switch
5. Handle
6. Heating elements
7. Foot
operAtion - before first use
Remove the halogen heater from the packaging and remove all the packaging materials.
MontAge - Assembling the foot
1. Make sure that the heater's power cord runs through the opening, with the plug at the bottom side of
the foot (See figure 2).
2. Use the two screws to mount the foot to the bottom of the heater (See figure 2).
3. Place the power cord in the notch under the foot.
1. 2. 3. 4.
Figure 2
Assembling the foot
16
instruction manual
5.
6.
7.
Figure 1