Battery Installation; Battery Charge - Panasonic KX-TGA820 Bedienungsanleitung

TGA820EX(ex).book Page 7 Wednesday, July 11, 2007 3:09 PM
Connections
• The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
Location
• For maximum distance and noise-free operation, place your base unit:
- away from electrical appliances such as TVs, radios, personal computers, or
other phones.
- in a convenient, high, and central location.

Battery installation

Important:
• Use only the supplied rechargeable batteries noted on page 4, 5.
• USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
• Ensure correct polarities (
S
• Wipe the battery ends ( ,
S T
• When installing the batteries, avoid touching the battery ends (
unit contacts.

Battery charge

Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show "Please Wait..." when the handset is
placed on the charger if it is not registered to a base unit.
• If you fully charged the batteries, but the operating time seems to be short, wipe
the battery ends (S, T) and the unit contacts with a dry cloth.
Registering the handset to the KX-TG8200/KX-TG8220 base
unit
Ensure that the handset is switched on. If it is not on, press and hold {ih} for
few seconds to turn the handset on.
1
Lift the handset and press {ih}. Place the handset on the base unit.
• Continue the operation even when the handset display shows
"Please Wait...".
2
Proceed with the operation for your model.
N KX-TG8200
Press and hold {x} on the base unit for about 5 seconds. (No registration
tone)
, ) when installing the batteries.
T
) with a dry cloth.
, ) or the
S T
7