Viewing Remote Control - Schaub Lorenz 40LE-E6800 Bedienungsanleitung

Viewing remote control

1. Source
2. Sleep Timer
3. No function
4. Play
5. Programme recording
6. Rapid reverse ( in media browser mode )
7. Mono/Stereo - Dual I-II / Current language (in
DVB channels)
8. Green button
9. Red button
10. Numeric buttons
11. Channel List/TV source
12. Menu
13. Volume up / down
14. Back button
15. Favourite channel list
16. Image size
17. My button 1
18. My button 2
19. Teletext
20. Electronic programme guide
21. Mute
22. Info
23. Exit (return)
24. Ok (confirm)
25. Programme up / down
26. Navigational buttons
27. Q.menu
28. Channel swap
29. Blue button
30. Yellow button
31. Subtitle on / off
32. Rapid advance
33. Stop
34. Pause (in media browser mode) / Timeshift
recording
35. Multimedia browser
36. Picture mode selection
37. Standby button
38. Function LED
NOTE: The Remote Control range is approximately 7m
/ 23ft.
Using My button 1
Press MY BUTTON 1 for five seconds when on a
desired source, channel or link, until the "MY BUTTON
IS SET" message is displayed on the screen. This
confirms that the selected MY BUTTON is now
associated with the selected function.
Using My Button 2
This button's main function is to switch between
DVB-T, DVB-C and DVB-S broadcasts. However,
if you press MY BUTTON 2 for five seconds, you
can set a function to it as described in My Button 1.
Note that if you perform first time installation, MY
BUTTON 2 will return to its default function, switching
between DVB-T, DVB-C and DVB-S broadcasts.
English - 39 -