Dietz CAN BUS 66010 Bedienungsanleitung Seite 26

26
3. When the LED GREEN switch off, release the button.
E
N
G
4. The LED of the interface start to blink GREEN, by making 1 flash follow by a pause. Now following the
sheet to choose the function you need. Each time the interface button is pressed the flashes of the LED
L
increase.
I
S
H
5. Once the desired function is set to confirm the selection, press and keep pressed the button till the LED
switch off, then release the button and the LED will light up GREEN.
LED
Flashes
Ignition (default)
1 green
Light output positive
2 green
Reverse gear output
3 green
Hand brake output
4 green
Parking sensor buzzer output
5 green
Mute output for FIAT with Blue & Me
6 green
Speed impulse 4,5 Hz/kmH
7 green
Speed impulse 0,85 Hz/kmH
8 green
Copyright © by Audiotechnik Dietz
Rev 1, Stand: 06 / 2010
Function
®
Vertriebs-GmbH ● Germany
Wire
pink
pink
pink
pink
pink
pink
grey
grey