Accessing The Basic Settings; Care And Cleaning; Hob; Hob Frame - Blaupunkt 5II6.3.0 Gebrauchsanleitung

Indicator Function
™Š Hotplate time selection
‹ Unlimited: the last hotplate programmed remains selected.*
Limited: The hotplate will only remain selected for 10 seconds.
‚
Return to basic settings
™‹
Personal settings.*
‹
‚ Return to factory settings.
*Factory settings

Accessing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch and hold the
2.
for 4 seconds.
and flash alternately in the displays and
™ ‚
preset.
Touch the E symbol repeatedly until the required function is
3.
displayed.

Care and cleaning

The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition

Hob

Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Do not use:
Undiluted washing-up liquid
■
Dishwasher detergent
■
Abrasive products
■
Corrosive products such as oven sprays or stain removers
■
Sponges that may scratch
■
High-pressure or steam cleaners
■
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.
Then select the required setting using the + or - symbol.
4.
E symbol
Touch the
5.
The settings have been saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
appears as a
‹

Hob frame

In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
E symbol for at least 4 seconds.
41