Probuilder 44021 Gebrauchsanweisung Seite 13

Introduction
Thank you for choosing this electric screwdriver from PRO-
BUILDER. PRO-BUILDER is a range of heavy-duty tools for
tradesmen and quality-conscious DIY enthusiasts. You have
purchased a high-quality and well-designed tool that offers
precision, durability and reliability. By following the instruc-
tions in this User Guide, your screwdriver will provide many
years of trouble-free use.
Please read this User Guide and the general safety instruc-
tions enclosed before using the screwdriver, to ensure you
get maximum use from the tool. Keep the User Guide in a
safe place as you may need to refer to it at a later date.
Use
This powerful screwdriver is ideal for working with a range
of materials, including wood, metal, masonry and man-made
materials. The direction selector switch allows screwing and
un-screwing and the adjustable chuck grip can take all types
of bits regardless of screw head type.
Technical specifications
Voltage/frequency:
Power rating:
Speed:
Main components
1. Screw shroud
2. Depth setting collar
3. Bit
4. Magnetic bit holder
5. Direction selector switch
6. On/off button (infinitely variable)
7. Lock button
8. Ventilation slots
Special safety regulations
Check that the ventilation slots are not blocked.
Do not use damaged or worn bits and always select the
correct type of bit for the job.
Check for concealed power cables, pipes etc in the items
or surface you are going to screw in. Do not touch metal
parts of the screwdriver during use on masonry.
Ensure the machine is completely stopped before changing
direction.
Preparation and adjustment
Selecting direction
Use the direction selector switch (5) to select direction.
230V ~ 50Hz
Bit replacement
750W
Pull the screw shroud (1) out of the depth setting collar (2),
while turning it gently.
0-4000 RPM
Extract the bit (3) from the magnetic bit holder (4) using pli-
ers.
Fit the new bit in the magnetic bit holder. Replace the screw
shroud on the depth setting collar while turning it gently.
Adjusting screw depth
Screw depth can be set quickly and easily by turning the
depth setting collar so that the screw shroud is either ad-
vanced or retarded.
Test on a piece of scrap wood and if necessary adjust the
screw shroud until its position is correct for the job.
If the shroud is advanced so far it covers the screw head,
the screw will not be driven completely into the item.
Bit replacement
Pull the screw shroud (1) out of the depth setting collar (2),
while turning it gently.
Extract the bit (3) from the magnetic bit holder (4) using
pliers.
Fit the new bit in the magnetic bit holder. Replace the screw
shroud on the depth setting collar while turning it gently.
Adjusting screw depth
Screw depth can be set quickly and easily by turning the
depth setting collar so that the screw shroud is either ad-
vanced or retarded.
Test on a piece of scrap wood and if necessary adjust the
screw shroud until its position is correct for the job.
13
ENGLISH