Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
THE DESIGN OF THE AMPLIFIER
1
Ultra-low internal resistance due to solid gold-pla-
ted terminals; for power cables up to 50 mm² and
speaker cables up to 6 mm²
2
External connection for BRAX-Power-Stabilizers
directly connected to the switching transistors gu-
arantee exceptional high efficiency and optimum
power stabilization
Interference-free power supply due to optimized
3
suppression coil up to 150 A with ultra-low internal
resistance
4
Four Mini-Blade fuses in parallel (4 x 25 A) in order
to minimize the internal resistance
5
Six capacitors, each with 5.000 µF (in total 30.000
µF), take care of an extremely high current impulse
load. Especially designed capacitors with 8-times-
contacted wound foil minimize the internal resi-
stance
6
200 A high-performance switching transistors.
7
High efficiency due to super-fast Schottky-power
diodes with more than 160 A in total
Optimum power supply of the amplifier transistors
8
due to newly developed storage coils that bridge
the switching delay dead times
9
Special developed transformers with highly-efficient
core materials guarantee a total performance of
more than 1.200 Watts
10
Optimum power supply of the transistors due to four
8-times-contacted low-impedance capacitors with a
total capacity of 15.600 µF.
11
Separate switching power supply for the supply
voltage of the DSP-PCB (NOX4 DSP).
12
Best signal processing due to a newly developed
and discretely designed driver.
13
16 handselected high-end MOSFET transistors
which account for brilliant sound.
14
High-end BurrBrown 2-channel D/A signal con-
verter (3 x 2-channel) for best possible signal
conversion
15
High-End Audio-DSP with 6 freely configurable
channels
16
High-End Asahi Kasei A/D converts for a lossless
signal conversion of the analog signal
17
Processor-controlled adjustment of the input sen-
sitivity via special digital-controlled level control-
ler.
Siemens high-current relays with Degussa-
18
contacts account for the internal and external
protection of the amplifier
Reed-relais for a distortion-free turn-on and turn-
19
off of the DSP controlled Line-Outputs E and F
(NOX4 DSP)
RCA line outputs for connecting another amplifier.
20
These outputs can be freely configured via the
DSP
21
Gold-plated RCA (cinch) inputs and outputs gua-
rantee an interference-free signal transmission.
22
The solid heatsink, made of a special aluminium
alloy takes care of a perfect cooling of power sup-
ply transistors and those of the amplifier.
21
Werbung
Inhaltsverzeichnis
