Bestron D1800SP Bedienungsanleitung Seite 28

Guide the power cord whilst it rewinds onto the reel, since
otherwise the cord could become tangled or the plug could
strike the back of the appliance. Take hold of the power
cord near the mark, and allow it to gently slide through your
fingers back into the appliance, see Figure 8.
cleAninG And MAintenAnce - cleaning the housing
1. Remove the plug from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
3. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAninG And MAintenAnce - removing waste from the dust receptacle
1. Remove the plug from the wall socket.
2. Remove the hose.
3. Remove the dust receptacle by
pressing the release button on the
dust receptacle (see Figure 10)
and pulling on the receptacle, and
hold it above a waste-bin.
4. Press the button in the handle to open the bottom flap (see Figure 11).
5. If so required, use your hand to remove any waste sticking to the receptacle.
6. Close the bottom flap, and press until it clicks into place.
7. Fit the dust receptacle onto the appliance, and click it into position.
cleAninG And MAintenAnce - cleaning or replacing the hePA filter
For best results clean or replace the HEPA filter after every second or third use of the vacuum cleaner, or
more frequently if the filter is visibly blocked.
Figure 9 Storing the vacuum cleaner
Figure 10 Removing waste from the dust receptacle
28
user's instructions
Figure 11