Putting Into Service; Operation; Error Messages; Technical Data - ADE KE 1203 Ellen Bedienungsanleitung

Thank you for purchasing this high-quality product made by ADE. You have acquired a
set of scales that meet the highest technical standards and are of proven quality.
Please read these operating instructions carefully before using the product for the first
time and keep them in a safe place where you can find them whenever you need the
information contained in the instructions.
1.

Putting into service

Activate / Replace batteries:
Open the lid of the battery compartment on the bottom of the
scales and remove the battery safety strip. Please observe the
correct polarity of the batteries (+/-).
To replace the battery open the lid of the battery compartment. Move the battery at the
recess downwards. In this way, the battery will be easy to take out. Make sure that you
do not bend the contact. Insert the new battery (1 x CR 2032) and close the lid of the
battery compartment.
Safety information:
Ensure that no objects fall onto the scales; otherwise, the scales
may be damaged.
Only use a damp cloth to clean the scales. Never use solvents
or abrasive cleaners. Do not put the scales under water. You
must clean all the plastic parts of the scales immediately after
they come into contact with grease, spices, vinegar or any other
strongly spiced or coloured foods. Avoid any contact with citric
acid.

2. Operation

Switch-on the sca le:
Place the scales on a firm, level base. Switch-on the scales by a short press onto the
ON/TARE/OFF-button at the right side of the scales. At first, the LCD display shows
"8.8.8.8" and all symbols. After the scales have stabilised, the indication will be "0 g".
The scales are now ready to weigh.
Units of weight:
To set the unit of weight (g = gram / lb: oz = pound: ounce / ml = millilitre / fl: oz = fluid:
ounce) switch-on the scales. As soon as the display indicates "8.8.8.8", shortly press the
2
ON/TARE/OFF-button repeatedly until the requested unit of weight appears. Please
ensure that the scales are set to the appropriate units of weight for you.
Tare-func tion:
Pressing the ON/TARE/OFF-button allows you to set the scales to "0 g". Place a bowl, for
example, on the platform of the scales, press the ON/TARE/OFF-button and in this way
set the scales back to "0 g". You can repeat this procedure as often as you like until the
total capacity of the scales (5 kg) has been reached. After you remove the item(s) to be
weighed, the total weight is displayed as a minus value.
Automatic - / manua l switch-off the sca le:
If the indicated weight does not change within approx. two minutes, the scales will
automatically switch-off. To save the battery you can also manually switch-off the scales
by pressing the ON/TARE/OFF-button for about 2 seconds.

3. Error Messages

"Lo" = Indication that the battery is flat - Please replace the battery
with the intended type (1 x CR 2032).
"EEE E" = Overload display - The 5 kg maximum capacity of the scales has
been exceeded. Immediately remove the load from the scales;
otherwise, the load cell could be damaged.

4. Technical Data

Capacity x graduation: max. 5 kg x 1 g
Dimensions: 157 mm x 224 mm x 17 mm
Battery: 1 x CR 2032 (included)
Subject to technical changes due to further-development of the product.

5. Guarantee

ADE guarantees to rectify any defects due to material or manufacturing defects by means
of repair or replacement free of charge for a period of three years. In the case of guarantee
claims, please return the scales together with the sales slip to your retailer and stating the
reasons for the claim.
CE Dec laration of Conformity
This device is interference-supp ressed in accordan ce
with the applicable EU directive 2004/108/EC
Note: Extreme electromagnetic influences, e.g. when operating radio communication
equipment is being operated next to the scales, can affect the displayed value. When the
interference is over, you can use the product for its intended purpose again; it may be
necessary to switch it on again.
3