Picture Menu; Advanced Settings - Samsung PS50C490B3W Bedienungsanleitung

Basic Features
■ Information: Display a show you have reserved
to watch. (You can also change the reservation
information.)
■ Select All / Deselect All: Select or deselect all reserved
programmes.
Channel List Transfer
The PIN input screen appears. Enter your 4 digit PIN number.
Imports or exports the channel map. You should connect a
USB storage to use this function.
■ Import from USB: Import channel list from USB.
■ Export to USB: Export channel list to USB. this function
is available when USB is connected.
Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel
manually.
✎
Fine tuned channels are marked with an asterisk "*."
✎
To reset the fine-tuning, select Reset.

Picture Menu

¦ Changing the Preset Picture Mode
Mode
Select your preferred picture type.
■ Dynamic: Suitable for a bright room.
■ Standard: Suitable for a normal
environment.
■ Movie: Suitable for watching movies in a
dark room.
¦ Adjusting Picture Settings
Cell Light / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎
NOTE
x
In analogue TV, Ext., AV modes of the PAL system,
the Tint (G/R) function is not available.
x
In PC mode, you can only make changes to
Cell Light, Contrast and Brightness.
x
Settings can be adjusted and stored for each
external device connected to the TV.
14
English
¦ Economical Solutions
Eco Solution
■ Energy Saving (Off / Low / Medium / High /
Picture Off)
the TV in order to reduce power consumption. If you
select Picture Off the screen is turned off, but the
sound remains on. Press any button except volume
button to turn on the screen. Until the screen turns on
again, a distorted picture will be displayed for about 4
seconds.
■ Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
✎
Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
✎
■ No-Signal Power Off (Off / 15 min / 30 min / 60 min):
To avoid unnecessary energy consumption, set how long
you want the TV to remain on if it's not receiving a signal.
✎
¦ Changing the Picture Options
Advanced Settings
P.MODE
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎
In PC mode, you can only make changes to
Dynamic Contrast, Gamma and White Balance.
Black Tone
Dynamic Contrast
Gamma
RGB Only Mode
Colour Space
White Balance
Flesh Tone
t
: This adjusts the brightness of
If you adjust the Cell Light, the Eco Sensor will
be set to Off.
If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
Disabled when the PC is in power saving mode.

Advanced Settings

▼
UMove
: Off ►
: Medium
: 0
: Off
: Native
: 0
E Enter R Return