AEG CTV 4858 Bedienungsanleitung Seite 34

15,4" LCD TV CTV 4858 LCD
INSTALLATION
Fig. 1
34
Insert the battery into the remote control
2 micro batteries (R03, "AAA", 1,5V) are requested.
Procedure
1. Remove the battery cover by pressing it and liding it down.
2. Insert the 3V battery, make sure the polarity (+/-) of the
battery matches the polarity marks inside the compartement.
3. Replace the battery cover by sliding it on the remote control,
you hear a click sound.
Note
A wrong proceeding can leak the battery or to corrosion, which
could damage the remote control maintenance.
Precautions
Batteries are not to be disposed of together with domestic
wastes. Dispose of the used batteries at the relevant collection
bin or at your dealer's.
Do not expose the batteries to high temperatures or direct
sunlight. Never throw batteries into the fire. There is a danger
of explosion!
Batteries do not reload, short circuit or take apart!
Different battery types or new and used batteries must not be
used together.
4. If you cause an electrostatic unloading by touching and the
equipment does not function any longer, simply pull the plug
from the AC plug socket, wait a few minutes and connect the
cable again. The equipment should function completely
normally again.