Description Of The Display; Function Display Sequence; Digital Pairing Of The Computer With The Sensors - Mavic Wintech FS Bedienungsanleitung

Changing the computer's batteries
has the effect of zeroing the following
parameters: total distance, measurement
unit (M or KM), wheel circumference,
time.
After installation, or after changing
batteries (in sensors or computers),
it is imperative to repeat the digital
pairing operation described in section 9 of this notice.
Battery life: 12 to 24 months depending on use.

7. DESCRIPTION OF THE DISPLAY

BK 1, 2 or H
AV: Average speed (up to 99.9) and
cadence (optional – up to 180)
MAX: Maximum speed (up to 99.9)
and cadence (optional – up to 180)
KM / M: Distances in kilometers or
miles
: Trend indicator
CAD: Pedaling cadence (optional – up
to 180)
ATM: Stopwatch (up to 9 h 59 min
59 s)
DST: Trip distance (up to 1999.99)
ODO: Distance totalizer (up to 99.999)
CR 1 à 9: Intermediary stopwatches
CLK: Clock

8. FUNCTION DISPLAY SEQUENCE

8.1 To scroll display, press right key briefly:
Screen 1:
6.3
Screen 2:
8.2 To scroll display, press left key briefly:
Screen 3:
(optional)
8.1
Screen 1 Screen 2
R
9. DIGITAL PAIRING OF THE COMPUTER WITH
THE SENSORS
9.1 Use the right button to select screen 1 (DST). Press the
right button for more than 4 seconds. The bike number (BK 1)
flickers. Press the right button to validate.
9.2 The speed (00) and pedaling cadence (0) flicker. Turn the
front wheel until the speed is displayed (if you are using the
pedaling cadence option, turn the cranks also). When both
speed and cadence are displayed, press the right button to
validate.
9.1
R
4 sec.
Screen 4:
(optional)
8.2
Screen 3 Screen 4
R L L
9.2
R R
13