Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The Mavic team has put all its passion, experience and skill
into the design and manufacture of your computer.
It will be an important aid to you in the improvement of your
performance.
Thank you for putting your trust in Mavic products.
SUMMARY
After installation and before you use your computer for the
first time, it is IMPERATIVE to perform the digital pairing
operation described in section 9 of this guide. If you don't,
there will be no communication between the computer
and the different sensors and your system will not work.
11
11
12
1. DESCRIPTION
12
1.1
12
1.2 Speed sensor
12
1.3 Computer mount
13
1.4 25.4 handlebar mount adapter
1.5 All purpose magnet
13
1.5
13
2. INSTALLING THE COMPUTER MOUNT
14
2.1. Install the mount on the handlebar, to the right of the
14
handlebar stem.
15
15
16
16
2.2
16
17
17
2.3.1
2.3.2
1.3
1.4
To fix it to an oversize, 31.8
diameter handlebar, just remove the
25.4 adaptor.
2.2 Install the mount on the
handlebar.
2.3 The mount can be installed
in a variety of positions: with the
computer to the fore or over the
handlebar stem.
2.4 Once you have chosen the right
position, tighten the screw with a
cross-slot screwdriver.
2.4
1.2
11
Werbung
Kapitel
Inhaltsverzeichnis
