Product Description; Front Panel - Philips DCR 2021 Benutzerhandbuch

DCR 2021_Premiere_indice 1b

1 Product description

1.1 Front panel

EN
Q
1 Smart Card slot:
2 I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
U
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The front panel
LED blinks at remote control command reception.
STATUS INDICATOR TABLE
Mode
Low power
Standby
TV/Radio mode
Timer active in running mode
Timer active in standby
Download in progress
If you have put your receiver in "standby" and the LED is blinking red, it indicates that
an upgrade of your receiver is taking place. Do not interrupt this operation.Wait for
the LED to blink green, indicating successful download.You can then continue as normal.
When your receiver is in low power mode, software functions are no longer
supported.Therefore EPG data may not be up-to-date when waking-up from
low power (see paragraph 6.8).
56
8/03/06 16:29
see chapter Inserting your Smartcard
. . . . . . . . . . . . . . . . . . . . . . .
channel -
channel +
remote control receiver window
ON/ Low Power/Reset (5 second key press)
button includes a colour LED indicating the receiver status.The
Indicator LED
red
orange
green
Dimmed green
Dimmed orange
Blinking red
Page 56
W E R T