Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
It is necessary to avoid overheating of the
adequate distances from heat sources and by the use of a suitable
thermal insulation plate. Proper ventilation of the appliance must also
be ensured.
Your refrigerator needs ventilation
Integratable models (i-appliances)
The integrated door of the furniture cabi-
net largely seals the installation recess. i-
appliances must therefore be provided with
ventilation by having an opening in the
furniture plinth. The warmed air must be
able to be exhausted upwards through the
air shaft on the furniture back.
The ventilation cross-sections should be at
least 200 cm
Warning -
tions
correctly, never cover or obstruct the
ventilation openings.
Installation
See installation instructions supplied.
Please check whether, after installing your appliance and especially
after rehingeing the door, the door seal seals right round. An untight
door seal may lead to heavy frosting and thereby to a higher power
consumption (see also „What to do if...").
Electrical connection
A correctly installed, earthed socket is required for the electrical sup-
ply. The supply must have a fuse rating of at least 10 Amps. If the
socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance
from the mains (e.g. a fused spur).
Before initial start-up, refer to the appliance rating plate to ascertain
if supply voltage and current values correspond with those of the
.
2
To ensure the appliance func-
appliance
by maintaining
2
min. 200 cm
50
2
min. 200 cm
Installation
25
Werbung
Kapitel
Inhaltsverzeichnis
