Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Installing/Replacing the lamp
For the installation, you need one 230 V/300 W GX-6.35 lamp for each device.
During the operation, the lamp reaches temperatures of up to 270° C.
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
15/35
(7) Power supply
(8) XLR-In socket
(9) XLR-Out socket
(10) Fuseholder
(11) Microphone
(12) Eyelet for safety rope
51806243X18NXS_V_1_0.DOC
Werbung
Inhaltsverzeichnis
