Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNINGS
Visible and invisible laser-light, direct beam can damage the human eye and the eyes of animals. Do not look at
any Laser light directly.
Do not touch the laser aperture with the hand. When cleaning the laser aperture, please use a soft cloth with
alcohol or camera lens paper.
Do not take apart or modify the equipment. Fire or electrical shock may result.
In the unlikely event that you hear unusual noise, see smoke, feel excessive heat or smell anything unusual,
immediately unplug the power source and contact your retailer. Continued use may result in fires or electrical
shock.
Do not use flammable sprays near this equipment. Also do not spill water, liquids, or flammable liquids on the
equipment. If fluids enter this equipment and contact the electrical parts, fires or electrical shock may result. If
anything enters the equipment, immediately unplug the power supply and contact your retailer.
Installation
1. Carefully inspect your Laser Show equipment after you unpack it. If any damage is evident, such as dents or
scratches on the covers or broken knobs, etc., immediately notify your carrier and your local sales distributor.
2. Hang up the equipment in a safe place. Ensure there are no barriers in front of the laser aperture.
Features of the product:
1. Laser power: 80mW green + 150mW blue + 200mW red, mixed 350mW pink laser
2. Scanner system: Micro stepper motor
3. Working Modes: Sound Active, Auto run, DMX512 (7 CH), Master/slave mode.
4. Interface: 3 pins XLR jack for DMX or Maser-Slave linking
5. Input power: AC 110~240V, 50/60Hz. Rated power: 30W.
6. Packing Size: L*W*H=435*215*225mm; Weight: 3.5KG
5
Werbung
