Herunterladen Inhalt Inhalt Diese Seite drucken

T-Net Mode / Private Exchanges; R" Button On Private Exchanges; R" Button And The Deutsche Telekom T-Net Functions; Dialling Telephone Numbers When Using On Private Exchanges - AUDIOLINE TEL 5 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

- T-NET/Private exchanges -
5

T-NET mode / Private exchanges

You can use the "R" signal button on your telephone on private
exchanges and when using DEUTSCHE TELEKOM's T-Net
functions.
5.1

"R" Button on Private Exchanges

If you have connected your telephone to a private exchange,
you can use all the facilities such as call transfer, automatic
recall, etc. The "R" signal button gives you access to these
facilities. The FLASH time "100ms" will be required on a
private exchange. Slide the R switch on the right-hand side of
the receiver to the 100 ms position for this purpose. You can
find out from the dealer from whom the equipment was
purchased whether your telephone will work on your private
exchange without any problems and what further facilities you
will receive from this.
5.2
"R" Button and the Deutsche Telekom T-NET
functions
Your telephone supports the most important DEUTSCHE
TELEKOM added value functions (e.g. brokering, call waiting,
three-way conference, etc.). The T-NET works using the
"FLASH 300ms" setting. Slide the R switch on the right-hand
side of the receiver to the 300 ms position for this purpose.
Please contact DEUTSCHE TELEKOM to gain access to the
T-NET functions (some of which are subject to charge).
5.3
Dialling telephone numbers when using on
private exchanges
With private exchanges, it is necessary to dial a certain
number (e.g. "9" or "0") in order to obtain a dialling tone for an
outside line on the extension. With some, older private
exchanges, it takes some time before the dialling tone can be
heard. Especially for these private exchanges, an automatic
pause can be inserted after connecting to the outside line so
that you can dial directly without waiting for the dialling tone.
Press the redial button
outside line and the actual telephone number. After connecting
to an outside line your telephone will wait for 3 seconds before
dialling the actual telephone number.
once between the number for the
19

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis