Herunterladen Diese Seite drucken

Icy Box IB-273StU3 Handbuch Seite 2

Werbung

IB-273 Series
1.
Model – HDD – Interface – Colour
1.
Modell – Festplatte (HDD) – Schnittstelle – Farbe
Model
HDD
Interface
Colour
Modell
IB-273StU3
SATA
USB 3.0
Black/Silver
IB-273StU3
2.
Package contents
2.
Verpackungsinhalt
Case, pouch, USB 3.0 cable, screwdriver, manual
Gehäuse, Transporttasche, USB 3.0, Schraubendreher, Handbuch
3.
Key Features
3.
Merkmale
Aluminium / plastic enclosure
Aluminium / Kunststoffgehäuse
Blue lighting LED circle
Dekorativer LED blau beleuchteter Ring
External data interface: 1x USB 3.0
Externe Datenschnittstelle: 1x USB 3.0
Downwardly compatible with USB 2.0 and 1.1
Abwärtskompatibel mit USB 2.0 und 1.1
Transfer rate: USB 3.0 up to 5 Gbit/s
Übertragungsrate: USB 3.0 bis zu 5 Gbit/s
Supported operating systems: Windows, Mac and Linux
Unterstützte Betriebssysteme: Windows, Mac und Linux
HDD height up to 9.5 mm, capacity not limited
Plug & Play und Hot Swap
Plug & Play and Hot Swap
Festplattenbauhöhe bis 9,5mm, Kapazität ohne Limit
4.
HDD Installation
4.
Festplattenmontage
During the HDD assembly all cabling has to be disconnected from the computer.
Beim Ein- und Ausbau der Festplatte müssen alle Kabelverbindungen zum
Computer gelöst werden.
1
2
1
3
4
3
5.
Application
5.
Anwendung
5.1 The external HDD can be connected to or disconnected from the computer
5.1 Die externe Festplatte kann im laufenden Betrieb des Rechners an diesen
via USB cable without shutting down the computer.
via USB Kabel angeschlossen oder von diesem getrennt werden.
5.2 Please await the end of read/write operations before disconnecting
5.2 Bitte das Ende von Schreib- und Lesevorgängen abwarten bevor ein
the HDD to avoid data lost.
angeschlossenes Gehäuse vom Rechner getrennt wird, um Datenverlust zu
5.3 A new HDD must first be initialised, partitioned and formatted
vermeiden.
by the operation system to be displayed by the system.
5.3 Eine neue Festplatte muss vom Betriebssystem erst initialisiert, partitioniert
5.4 If the hard disc isn't recognised instantly by the operating system
und formatiert werden, um vom System angezeigt zu werden.
please check:
5.4 Wenn die Festplatte nicht sofort vom System erkannt wird bitte
- if the driver software is installed (USB),
prüfen:
- if the HDD is initialised, partitioned and formatted.
- ob die Treibersoftware installiert ist (USB),
- ob die Festplatte initialisiert, partitioniert und formatiert ist.
IB-273 Series
1.
Modèle – Disque dure – Interface – Couleur
HDD
Schnittstelle
Farbe
Modèle
Disque dure
SATA
USB 3.0
Schwarz/Silber
IB-273StU3
SATA
2.
Contenui de la livraison
Boîtier, sacoche pour transporter, câble USB 3.0, tournevis, manuel
3.
Spécialités principales
Logement de matière metal / plastique
USB 3.0 Host jusqu'à 5 Gbit/s
Rétrocompatible avec USB 2.0 et 1.1
Plug & Play et Hot Swap
HDD 9,5 mm de hauteur, capacité illimitée
Supporte: Windows, Mac, Linux
4.
Installation HDD
Devant l'installation ou la désinstallation d'un disque dur il faut débrancher tous
câbles de connexion à l'ordinateur.
2
1
4
3
5.
Application
5.1 Le boîtier externe peut être connecté directement à l'ordinateur en utilisant le
câble USB. Le disque dur peut être branché ou débranché de
l'ordinateur pendant l'exploitation normale de l'ordinateur.
5.2 Attendez le complètement des écritures et des lectures avant de déconnecter
un boîtier branché à l'ordinateur pour éviter une perte de données.
5.3 Avant tout, un disque dur nouvel doit être initialisé, partitionné, et formaté par
le système d'exploitation pour être indiqué par le système.
5.3 Si le disque dur n'est pas reconnu immédiatement par le système, vérifiez le
suivant:
- si le logiciel de pilotes est installé (USB),
- si le disque dur est initialisé, partitionné, et formaté.
IB-273 Series
1.
Módulo – Disco duro – Interfaz – Color
Interface
Couleur
Módulo
Disco duro
Interfaz
USB 3.0
Noir/argent
IB-273StU3
SATA
USB 3.0
2.
Contenido del embalaje
Caja externa, bolsa del transporte, cable USB 3.0, destornillador, manual
3.
Característica
Caja externa de aluminio y plastic
USB 3.0 Host hasta 5 Gbit/s
Compatible hacia atrás con USB 2.0 y 1.1
Plug & Play y Hot Swap
HDD 9,5 mm de altura, capacidad ilimitada
Soporta: Windows, Mac, Linux
4.
Ensamblaje de disco duro
Antes de instalar o desinstalar un disco duro se debe desdesconectar los cables de
conexión / alimentación al ordenador.
2
1
2
4
3
4
5.
Aplicación
5.1 Se puede conectar la carcasa directamente por el cable USB. Se
puede conectar o desconectar el disco duro del ordenador durante la operación
normal
5.2 Espere el fin de escrituras y lecturas antes de desenchufar una caja conectada
del ordenador para evitar pérdidas de datos.
5.3 En primer lugar, un nuevo dicso duro debe estár inicializado, compartimentado
y formateado por el sistema operativo para estar indicado por el sistema.
5.4 Repita la coneción y compruebe en caso de que el disco duro no
sea reconocido de inmediato por el sistema e examine lo siguiente:
- si el programa de control está instalado (USB),
- si el disco duro está inicializado, compartimentado y formateado.
IB-273 Series
IB-273 Series
1.
Modello – HDD – Extern collegamento – Colour
Color
Modello
HDD
Extern collegamento
Colour
Negro/plata
IB-273StU3
SATA
USB 3.0
Nero/argento
2.
Contenuto della confezione
Cassetto, borsa, cavo USB 3.0, cacciavite, manuale
3.
Caratteristiche
Alloggiamento in alluminio e palstico
USB 3.0 Host fino a 5 Gbit/s
Compatibile all'indietro con USB 2.0 e 1.1
Plug & Playe Hot Swap
HDD altezza 9,5 mm, capacità illimitata
Supporta: Windows, Mac, Linux
4.
HDD installazione
Staccare tutti i cavi di connessione con il computer durante il montaggio e lo smon-
taggio del disco fisso.
1
2
3
4
5.
Applicazione
5.1 Il contenitore esterno può essere collegato direttamente al computer tramite il
cavo USB. Il disco fisso può essere collegato o staccato dal computer
durante il funzionamento di quest'ultimo.
5.2 Attendere la fine di funzioni di lettura e di scrittura prima di staccare un
contenitore esterno collegato al computer, per evitare perdite di dati.
5.3 Ogni nuovo disco fisso deve venir inizializzato, partizionato e formattato dal
drive, prima di poter essere indicato dal sistema.
5.4 Se il disco fisso non viene riconosciuto subito dal sistema, verificare:
- se il software di drive relativo è installato (USB),
- se il disco fisso è stato inizializzato, partizionato e formattato.
IB-273 Series
1.
Modelo – Disco rígido (HDD) – Ligação – Cor
Modelo
HDD
Host
Cor
IB-273StU3
SATA
USB 3.0
Preto/prata
2.
Conteúdo da embalagem
Caixa, bolsa, cabo USB 3.0, chave de fenda, instruções
3.
Características
Caixa em alumínio e plástico
USB 3.0 com até 5 Gbit/s
Para trás compatível com USB 2.0 e 1.1
Plug & Play e Hot Swap
HDD altura 9,5 mm, capacidade ilimitada
Compatível com: Windows, Mac, Linux
4.
Montagem do disco rígido
Atenção: Ao instalar e remover o disco rígido, assegurar que todas as ligações dos
cabos ao computador estão desapertadas.
1
2
3
4
5.
Emprego
5.1 O disco rígido pode ser ligado (ao) ou desligado do computador mesmo
quando este estiver em funcionamento
5.2 Queira fazer o favor de aguardar que terminem os processos de leitura e de
escrita antes de desligar a caixa do computador para evitar perder os dados.
5.3 Um disco rígido novo apenas pode ser inicializado, compartimentado e forma-
tado a partir do sistema operativo para ser mostrado pelo sistema.
5.4 Se o disco rígido não for imediatamente reconhecido pelo sistema, verifique
o seguinte:
- Se o software do driver está instalado.
- Se o disco rígido foi inicializado, compartimentado e formatado.

Werbung

loading