Example Of A Properly Connected Sauna System; Technical Specifications - Eos Rks Gebrauchsanweisung

two wood screws „F".
Fill the stone container with the sauna
stones. Make sure that the stones are placed
in the stone container only, and not in the air
outlet „L". (Figs. 4 + 5)
Sauna stone
Heating ele-
ments
L
Hole for power cablel

Example of a properly connected sauna system

Saunasteuergerät
control unit
L1 L2 L3 N S1
400 V AC 3N
18
Stone
tainer
Fig. 4
L
K
J
Fig. 5
U V W WB WM N
Pass the power cable out through the hole
and terminate at a distribution box suitable
for use in damp areas „K" connected to the
supply feed from the controller. Never install
the distribution box in the ventilation shaft
con-
Technical specifi cations
Voltage: 400 V AC 3N 50 Hz
Power consumption: 4.6 kW depending on
model
Height: 780 mm
Width: 470 mm
Depth: 250 mm (incl. fi ttings)
Leakage current: maximum 0.75 mA per kW
of heating capacity
Sauna stove for use in family saunas
Sensor
GB
max. 9 kW
N U V W