Bosch TAS 40 Serie Gebrauchsanleitung Seite 22

20

Risk of scalding
!
– Never open the brewing unit during
the brewing process.
– Please note that the beverages are
very hot when dispensed.
Robert Bosch Hausgeräte GmbH
20 sec.
b. For a milder flavour and a larger drink:
Start the brewing process by pressing
the start /stop button.
Automatic icon flashes. When the
O
automatic brewing process is complete,
Manual icon lights up. If you press
N
and hold the start /stop button within 20
seconds, you can extend the brewing
process to get your desired drink
strength.
20 seconds after the end of each brewing
►
process, your TASSIMO machine returns
to stand-by mode.
Open the brewing unit and remove the
►
T DISC. Now you can sit back and enjoy
your hot drink. If you wish, you can
prepare the next drink immediately.
If you do not wish to prepare more drink,
►
we recommend that you turn off your
TASSIMO machine using the on/off
switch.
Note:
!
There may be short pauses during the
►
brewing process. This is so the drink
flavour is optimised.
Do not remove the water tank during the
►
brewing process.
Always remove the used T DISC after
►
the brewing process. Be careful and hold
it by the flap because the T DISC is hot
after brewing your drink. When removing
the T DISC, quickly flip it over so that
the printed side is face up to avoid any
dripping.
T DISC storage
T DISCs may be stored in their own
packaging or in other containers of your
choice. They should be stored in a cool, dry
place. It is not necessary to store T DISCs
in the refrigerator. Do not keep them in the
freezer. Provided the outer packaging is
intact, T DISCs may be used until the Best
Before date provided.
en