Ventilation Requirements; Installing The Appliance - AEG SDS31200S0 Benutzerinformation

4. Loosen the middle hinge.
5. Remove the lower door.
6. Loosen and remove the lower pin.
On the opposite side:
1. Tighten the lower pin.
2. Install the lower door.
3. Tighten the middle hinge.
4. Install the spacer.
5. Install the upper door.
6. Tighten the upper pin.

Ventilation requirements

The airflow behind the appliance must be suffi-
cient.

Installing the appliance

CAUTION!
Make sure that the mains cable can move freely.
Do these steps.
Installation
min.
50 mm
200 cm
2
35
min.
200 cm
2