Operating Instructions - Medela clario Gebrauchsanweisung

Operating instructions

CAUTIONS
The Clario is to be set up in such a way, that a
separation from the mains supply can be easily
managed� Calibrate the rechargeable battery
before the first use�
Connect Clario to mains power
1� Check the pump before use following the instruction in
chapter "Preparation for use"�
2� All versions:
or
AC / DC
version: (if
the pump is
operated using
the optional
car connection
cable)
or
AC / DC ver-
sion: if the
pump is oper-
ated with the
rechargeable
battery:
Plug in the mains plug of the power
cord to a fixed mains socket�
Connect the optional 12 V DC
connection cable to the socket on
the side of the pump and connect
it to the 12 V DC power source
(cigarette lighter in the car)�
No connection to a power source is
needed� Make sure that the battery
was charged for five hours�
13