EHC 2013CC Serie Bedienungsanleitung Seite 106

OPERATION
Oven functions and operation.
Natural convection oven
(conventional)
The oven can be warmed up using the bottom
and top heaters, as well as the grill. Operation
of the oven is controlled by the oven function
knob – to set a required function you should
turn the knob to the selected position, as well
as the temperature regulator knob – to set a
required function you should turn the knob to
the selected position.
O
C
The oven can be switched off by setting both
of these knobs to the position ""/"0".
Caution!
When selecting any heating function
(switching a heater on etc.) the oven
will only be switched on after the
temperature has ben set by the tem-
perature regulator knob.
Possible settings of the oven function
knob
0 0
Switching on the oven is indicated by two
signal lights, yellow and red, turning on. The
yellow light turned on means the oven is work-
ing. If the red light goes out, it means the oven
has reached the set temperature. If a recipe
recommends placing dishes in a warmed-up
oven, this should be not done before the red
light goes out for the first time. When baking,
the red light will temporarily come on and go
out (to maintain the temperature inside the
oven). The yellow signal light may also turn
on at the knob position of "oven chamber
lighting".
26
Separate oven lighting
By setting the knob to this posi-
tion the lighting inside the oven is
switched on, e.g. use when washing
the oven chamber.
Bottom and top heaters on
Setting the knob to this position
allows the oven to be heated con-
ventionally.
Bottom heater on
When the knob is set to this position
the oven is heated using only the bot-
tom heater. Use for e.g. final baking
from the bottom.
Top heater on
Setting the knob to this postion al-
lows the oven to be heated only with
the top heater switched on, e.g. use
for final baking from above.
Grill heater on
Setting the knob to this position
allows dishes to be grilled on the
grate.