Starting The Programme; Child Lock - Grundig GTA 38261G Benutzerhandbuch

3. Press End Time Setting selection
button to set the desired End
Time Setting symbol lights up
on the display.(When the button
is pressed and hold, End Time
proceeds uninterruptedly).
4. Press Start/Pause button. End
Time Setting starts to count
down. The ":" in the middle of the
displayed End Time Setting will
start to flash.
C
Additional laundry may be
loaded / taken out during
the End Time period. At
the end of the End Time
countdown process, End
Time symbol disappears,
drying process starts and
the programme duration
is displayed. The time on
the display is the total of
normal drying time and
End Time .
Changing the End Time
If you want to change the time during
countdown:
1. Press On/Off/Cancel button
for 3 seconds to cancel the
programme. Restart the machine
and repeat the End Time
procedure for the desired time.
2. When your machine is operated
for the first time, it starts
with the default programme
(wardrobe dryness for cottons).
Cancelling End Time function
If you want to cancel the End Time
countdown and start the programme
immediately:
1. Press On/Off/Cancel button
for 3 seconds to cancel the
programme.
2. Press On/Off/Cancel button to
start the programme you have
previously selected.
66

6.10 Starting the programme

Press Start/Pause button to start
the programme.
Start symbol will light up to
indicate that the programme has
started and ":" symbol in the middle
of the remaining time will keep
flashing.

6.11 Child Lock

Machine is equipped with a Child
Lock which prevents interfering
with the current programme flow
by pressing any button. All buttons
except the On/Off/Cancel button on
the control panel are deactivated
when the Child Lock is active.
In order to activate the Child Lock,
press Audio Warning, Child Lock
button for 3 seconds.
To start a new programme after the
current programme is over or to
interrupt the current programme,
the Child Lock should be
deactivated. Press the same button
for 3 seconds again to deactivate the
Child Lock.
C
Lock symbol will appear
on the display when the
Child Lock is activated.
C
Child Lock is deactivated
when the machine is
switched off and on with
On/Off/Cancel button.