Toshiba A3000P Bedienungsanleitung Seite 10

Tuning the television using Quick Setup,
sorting programme positions
Before switching on the television put your decoder and media recorder to Standby if they are connected.
To set up the television use the buttons on the remote control as detailed on page 6.
Connect the television to the mains power and
1
press the button. The Quick Setup screen will
i
appear.
Quick Setup
Select your language.
Language
EXIT Watch TV
Using left or right select your language, then
2
press OK.
Then press left or right to select your country
3
and press OK.
To start Auto tuning press OK.
4
Auto tuning
Searching
Channel : C22
Stop
EXIT
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
You must allow the television to complete
the search.
When the search is complete the television will
automatically select programme position 1. This
may not be a clear picture or the signal may be
weak, so the station order can be changed using
Manual tuning which will appear on the screen.
Manual tuning
Prog. Channel
1 C22
2 C28
3 C25
4 C32
5 C35
6 C69
Select Sort
OK
Back
MENU EXIT
English
OK Next
Station : BBC1
Station
BBC1
BBC2
ITV
CH4
BBC1
Watch TV
10
With the list of stations now showing use up or
5
down to highlight the station you want to move
and press right.
The selected station will be moved to the right of
the screen.
Manual tuning
Prog. Channel Station
1 C22
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C35 BBC1
6 C69
Store
Back
MENU EXIT
Use up or down to move through the list to your
6
preferred position. As you do so the other stations
will move to make room.
Press left to store your move.
7
Repeat as necessary, then press EXIT.
If the television cannot be connected to a media
recorder/decoder with a SCART lead or if a
station on another system is required, use
Manual tuning to allocate a programme
position, see page 11.
BBC1
Watch TV