Using your Revolution S
Short Circuit Protection:
If a short circuit occurs when the power button is pressed,
'atomizer short' will be displayed on the screen. If this occurs,
remove and reinstall the tank and atomizer, if this does not
resolve the issue then a new atomizer may be required. If
replacing the atomizer does not resolve the issue, please
contact customer services.
18
TW_Revolution S Manual.indd 18-19
Using your Revolution S
Low Voltage Protection:
When the battery voltage is below 3.1V, 'Battery Low' will be
displayed on the screen. If following this message, the button
is continually pressed, the message 'Battery Low Lock' will
be displayed and the device will not fire. To unlock and
activate the device the battery must be recharged.
19
27/06/2016 14:45