Herunterladen Inhalt Inhalt Diese Seite drucken

Behördliche Vorschriften - Philips SB4B1927VB Bedienungsanleitung

Standfuß für cloud-monitore
Inhaltsverzeichnis

Werbung

5. Behördliche Vorschriften
5. Behördliche Vorschriften
CE-Konformitätserklärung
Dieses Produkt erfüllt folgende Vorgaben:
• EN60950-1:2006+A11:2009+A1:2
010+A12:2011 (Einrichtungen der
Informationstechnik – Sicherheit).
• EN55022:2010 (Einrichtungen
der Informationstechnik –
Funkstöreigenschaften).
• EN55024:2010 (Einrichtungen
der Informationstechnik –
Störfestigkeitseigenschaften).
• EN61000-3-2:2006 +A1:2009+A2:2009
(Grenzwerte für Oberschwingungsströme).
• EN61000-3-3:2008 (Begrenzung
von Spannungsänderungen,
Spannungsschwankungen und Flicker)
gemäß geltenden Vorgaben.
• 2006/95/EC (Niederspannungsdirektive).
• 2004/108/EC (EMV-Direktive).
• 2009/125/EC (ErP-Richtlinie, EGV
1275/2008, Richtlinie zum Stromverbrauch
im Bereitschafts- und im Aus-Zustand);
Produktion durch ISO9000-zertifizierte
Unternehmen.
• 2011/65/EU (RoHS Directive)
Zusätzlich erfüllt das Gerät folgende Vorgaben:
• ISO9241-307:2008 (ergonomische
Anforderungen, Analyse- und
Konformitätsverfahren für elektronische
optische Anzeigen).
• GS EK1-2000:2013
(GS-Kennzeichnungsvoraussetzungen).
• prEN50279:1998 (Optische
Anzeigeeinheiten – Messverfahren
für niederfrequente elektrische und
magnetische Felder).
EN 55022 Compliance (Czech Republic Only)
Polish Center for Testing and Certification
Notice
The equipment should draw power from a
socket with an attached protection circuit (a
three-prong socket). All equipment that works
together (computer, monitor, printer, and so on)
should have the same power supply source.
The phasing conductor of the room's electrical
installation should have a reserve short-circuit
protection device in the form of a fuse with a
nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the
power supply cable must be removed from the
power supply socket, which should be located
near the equipment and easily accessible.
A protection mark "B" confirms that the
equipment is in compliance with the protection
usage requirements of standards PN-93/T-42107
and PN-89/E-06251.
36

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis