ZENEC ZE-MC194 Bedienungsanleitung Seite 36

EQ
■ Audio control allows you to easily adjust the audio system to get the best possible sound
effect.
1. enter the eQ setup mode
■ Press the [SEl] key on the remote control or touch the EQ icon in the user interface and
the following interface will display on the screen.
EQ parameters
2. select eQ mode
■ Touch the EQ selection bar repeatedly and the EQ mode will change.
3. adjust eQ parameters
■ To adjust EQ parameters, touch and drag the EQ parameters adjustment bar.
4. adjust front/rear/left/right fader and balance
■ you can adjust front/back/left/right balance of the speaker to a desirable listening effect
according to the surroundings and your preference.
■ To adjust Front/Rear/left/Right fader and balance, touch and drag the small white point
in the Fader/balance adjustment area.

notes:
■ The unit provides some EQ modes: user, Rock, hip hop, Dance, latin, Rave, urban,
Acoustic.
■ Different EQ reflects in different bass, Treble and mid level. The parameters of the EQ
modes has been preset and you can not change them besides 'user'.
■ The EQ mode will change to 'user' automatically when you adjust the value of bASS,
TREb or miD under the modes besides 'user'.
■ The value of Sub is independent of EQ mode and can be adjusted solely.
EQ selection
36
Fader/balance
adjustment area