AEG FAVORIT 65020 W0P Benutzerinformation Seite 24

24 www.aeg.com
2) Do not use salt at this level.
How to adjust the level of the
water softener
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a programme".
2. Press and hold, at the same time, De-
lay and Start until the indicators of
start to flash.
3. Press Program,
• The indicators of
6.2 Filling the salt container
, and
and
go off.
• The indicator of
ues to flash.
• The display shows the current set-
ting of the water softener. E.g.
= level 5.
4. Press Program again and again to
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt con-
tainer (only for the first time).
3. Fill the salt container with dishwash-
er salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out
from the salt container when you
fill it. Risk of corrosion. To pre-
vent it, after you fill the salt con-
tainer, start a programme.
contin-