Connecting Tv Via Hdmi Cable; Connecting Tv Via Scart Cable; Connecting Power - Octagon XP1000+ Bedienungsanleitung

2.1.1 Connecting TV via HDMI cable

For the sake of the best picture quality, especially for digital TV, HDMI connection is recommended. Most HDTVs have HDMI
connectors to ensure the highest picture quality. In the rear panel of XP1000+ one HDMI connector is available for this purpose.
Connect your TV to XP1000+ using an HDMI cable as follows.

2.1.2 Connecting TV via SCART cable

In case your TV is analogue TV, SCART cable is the most common method. Connect your TV to XP1000+ using SCART cable as
follows.

2.2 Connecting Power

A power adaptor is provided as one of the basic accessories of XP1000+.
1 Connect the power adaptor to the connector at the rear panel of XP1000+.
2 Connect the power adaptor to a power outlet.
3 Turn on the power switch at the rear panel.
NOTE : AC input condition
• Nominal Voltage Range : 100 - 240 VAC
• Maximum Voltage Range : 90 - 264 VAC
NOTE : means Remote control operation order.
HDMI Cable
SCART Cabel
• Nominal Frequency : 50 / 60 Hz
• Maximum Frequency Range : 47 - 63 Hz
42
HDMI
SCART