Product Descriptions - Octagon XP1000+ Bedienungsanleitung

1.3 Product Descriptions

Front Panel
XP1000
REC
➊ ➋ ➌ ➍ ➎ ➏
1. IR Receiver : Receive the IR signal from remote controller.
2. Recording Indicator : Display the current recording status of STB.
3. On/Off button and Indicator : Display the current power status of STB. Using this button, you can power on and off your STB.
4. Channel up/down : Using the channel up and down buttons, you can switch the channels directly on your STB.
5. Smartcard reader slot : Two Smartcard slots are provided.
6. CI Module slot : One CI module slot is provided.
Rear Panel
➊ ➋ ➌ ➍ ➎ ➏ ➐ ➑
1. LNB 1 IN : One Satellite cable can be connected.
2. SCART : One SCART connector is provided for TV using SCART cable.
3. HDMI : Connect to TV using an HDMI cable for both audio and video signals.
4. S/PDIF : Connect to a digital audio system using S/PDIF cable.
5. Ethernet : Connect Network.
6. USB : Connect the USB memory stick or external HDD.
7. DC Power Jack : Connect the provided AC/DC adapter (2.5A@12V).
8. DC power On/Off Switch : Power on/off.
36