Rigging The Fixture - Beamz 152.927 Methone 3D Laser Red & Green Gebrauchsanleitung

CAUTION: Use of controls, adjustments, or performance

Rigging the Fixture

CAUTION: Please consider the respective national norms during
the installation! The installation must only be carried out
by an authorized employee or dealers!

The installation of the fixture has to be built and constructed in a way that it can
hold 10 times the weight for 1 hour without any harming deformation.

The installation must always be secured with a secondary safety attachment, e.g.
an appropriate catch net. This secondary safety attachment must be constructed
in a way that no part of the installation can fall down if the main attachment fails.

Make sure the area below the installation place is free from unwanted persons
during rigging, de-rigging and servicing.

The operator has to make sure that safety-relating and machine-technical
installations are approved by an expert before taking into operation for the first
time and after changes before taking into operation another time.

The operator has to make sure that safety-relating and machine-technical
installations are approved by a skilled person once a year.

The fixture should be installed in the position where persons cannot reach and
where persons may walk by or be seated.
of procedures other than what is specified
herein may result in hazardous radiation
exposure