Xoro HRS 3400 Bedienungsanleitung Seite 69

My Dish—Single Connection
Strength
The received signal strength is shown in percentage and in the bar.
Quality
The received signal quality is shown in percentage and in the bar. Lower values are an indi-
cation for more artifacts, freeze pictures and other picture distortions.
Press the OK button and you can then adjust
the other parameters of the scan. Press the
BLUE button on the remote control and ac-
cess to the final parameters for the search.
The searching and founded the TV channels,
you can affect the order in which Scan Mode.
A standard search or a "blind" Search.
Scan Mode
The two options are:
Default The searching runs in
depending of the preset satellite and transponder lists.
Blind With this option the searching runs without reading the transponder list and
every received signal will be analyzed.
Note:
Often there are changes by the transponder list. So please use the setting Blind.
Programme
Allows you to decide whether you want to search only free channels or pay-TV. The pay-TV
is encrypted and can usually only a very few times in clear to be seen. Approx. 2 / 3 of all TV
channels are encrypted and can not therefore ASTRA with the recipient decrypts to be seen.
Note:
In the selection is only open after a successful scan, the TV channel list much more manage-
able.
First Time Installation
HRS 3400
17