BASETech 1460907 Bedienungsanleitung Seite 4

Operation
a) Displaying the temperature and humidity
• The current ambient temperature is displayed next to the thermometer symbol on the left of
the LCD display (1).
- HH is displayed if the measured temperature exceeds +70 °C.
- LL is displayed if the measured temperature drops below -20 °C.
• The current humidity is displayed next to the raindrop symbol on the right of the LCD display.
- HH is displayed if the measured humidity exceeds 99 %.
- LL is displayed if the measured humidity drops below 20 %.
b) Displaying and deleting max/min values
• To display the maximum ambient temperature, press the MAX/MIN/RESET button (2) once.
The upwards arrow symbol will be displayed together with the maximum temperature value.
• To display the minimum ambient temperature, press the MAX/MIN/RESET button again. The
downwards arrow symbol will be displayed together with the minimum temperature value.
• To go back to the initial display with the current ambient temperature, press the
MAX/MIN/RESET button.
• To delete the saved temperature and humidity values, press and hold the MAX/MIN/RESET
button for a few seconds.
• Removing and replacing the batteries also deletes the saved values and resets the product
(for more information, see the section below "Resetting the LCD display")).
c) Resetting the LCD display
• If the LCD display (1) does not display the temperature and humidity properly, restore the
product to its factory settings.
• To restore factory settings, remove one or both of the batteries.
• Wait for a few seconds and then reinsert the batteries.
d) Weather forecast
The thermo-hygrometer displays a weather forecast based on the measured humidity.
To ensure that forecasts are as accurate as possible, the product should be placed in a
well-ventilated location that will not skew the humidity measurements. Avoid placing the product
in air-conditioned rooms, areas with higher or lower humidity, or near to sources of heat such as
radiators, ovens and fireplaces.
The weather forecast symbols indicate the following weather conditions:
Sunny Partly cloudy
Care and cleaning
• Remove the batteries before cleaning the product.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or even impair the functioning of the product.
• Use a dry, lint-free cloth to clean the product.
Cloudy Rain
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used
batteries. Disposing of them in the household waste is prohibited.
Batteries that contain hazardous substances are labelled with this symbol to indicate
that disposal in the domestic waste is forbidden. The designations for the heavy
metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on batteries,
e.g. below the trash icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................... 2 x 1.5 V/DC AAA batteries (not included)
Temperature range .......................... -20 to +70 °C
Humidity range ................................ 20 – 99 %
Temperature accuracy ..................... ±1 ºC from 0 to +40 ºC, otherwise ±2 ºC
Humidity accuracy ........................... ±5 % from 50 – 80 %, otherwise ±8 %
Operating/storage conditions ........... -10 to +50 °C, 20 – 99 % RH
Dimensions (W x H x D) .................. 80 x 80 x 18 mm
Weight ............................................. 62 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE. *1460907_v1_0716_02_DS_m_DE_GB_(1)