Pkm WKS 72B Bedienungsanleitung Seite 26

 Some items have dropped behind
the appliance.
 The appliance is not installed on a
level, dry and solid floor.
 Door seal is defective.
 Shelves are not inserted properly.
 Control panel is defective.
 If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the shop you purchased the appliance at.
The operating procedures described below are normal
 The refrigerant generates a sound similar to flowing water.
 Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
 The sides of the appliance may get warm while the appliance is running.
When you run the appliance for the first time or the temperature falls below a
certain level the appliance will operate with high power to reach the preset
temperature.
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
You will hear the compressor click when it is activated or deactivated.
is caused by the compressor while running.
may be generated by sequential expansion and shrinkage of the components of the
cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.
The door does not close properly.
Control buttons do not work.
and do not indicate a malfunction.
Distinct noise
Condensed water in/on the appliance
Clicking
Knocking/snapping
 Realign the appliance.
 Replace the door seal.
 Insert the shelves properly.
 Contact the aftersales service.
Hum
26