2. For easy access to the storage content, pull the shelves approx. 1/3 out. A notch
on both sides of the tracks protects bottles from falling down.
3. When you want to remove/insert a shelf, hold it tilted (see below).
6
POSSIBLE CAUSE
The plug of the appliance is not
connected to the socket.
The plug has become loose.
The socket is not supplied with
energy.
The fuse is switched off.
The voltage is too low.
The door was frequently opened.
The door is not properly closed.
The appliance is overfilled.
The door seals are damaged.
Main control board is defective.
PCB is defective.
Plug is defective.
LED is defective.
Temperature cannot be determined.
The appliance is not installed on a
level, dry and solid floor.
The appliance is in contact with a
wall or another item. The bottles are
incorrectly positioned.
TROUBLE SHOOTING
MALFUNCTION
The appliance does not work at all.
Unsatisfactory cooling capacity.
No LCD display.
LCD indicates
Unusual noise.
MEASURE
Check the corresponding socket by
connecting it with another appliance.
Check the fuse box.
Compare the data on the model
plate with the data of your energy
supplier.
Close the door properly.
Do not overfill.
Replace the seal.
Contact the aftersales service.
error
.
Contact the aftersales service.
Realign the appliance.
Readjust the appliance.
Realign the bottles
Remove these items.
25
6