Changing The Single Hotkey - G&D DVIVision Installationshandbuch

Configuration

Changing the single hotkey

Press the hotkey and the
DVIVision system.
If an application program or another G&D device uses the same hotkey within the
cascade, the hotkey can be changed.
NOTE:
The single hotkey
How to change the current hotkey:
1. Press Hotkey+Backspace
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable a certain hotkey:
Ctrl  Enables
Alt  Enables
Alt Gr  Enables
Win  Enables
 Enables
Shift
1. Use the terminal emulator to establish the connection to the DVIVision system.
2. Use the arrow
3. Press Space
Ctrl  Enables
Alt  Enables
Alt Gr  Enables
Win  Enables
Shift  Enables
4. Press the S
Related topic:
 Using single or double hotkeys on page 17
18 · G&D DVIVision
Backspace key simultaneously to start the setup mode of the
Ctrl is preset at default.
(default:
Ctrl as hotkey
Alt as hotkey
Alt Gr as hotkey
Win as hotkey
Shift as hotkey
keys to select Hotkey
(repeatedly) to enable a certain hotkey:
Ctrl as hotkey
Alt as hotkey
Alt Gr as hotkey
Win as hotkey
Shift as hotkey
key to save your settings.
Ctrl+Backspace ) to enable the setup mode.
.