Basic Operations; Parking Brake Inhibit; Power On / Off; Mute - Tristan Auron BT2D7013A Betriebsanleitung

Parking Brake Inhibit

• When the "BRAKE" cable is connected to the brake switch, the video playback will be controlled
by driving status, system setup and input video sources.
• Parking brake function is overridden when the video source is set to REVERSE.
• When the car is moving ahead, if video is played, the screen appears WARNING information,
and blank screen. The warning screen will prevent the driver watching images. The passengers
at the rear seats can watch normally.

Power On / Off

/VOL/
Press the [
light up for a moment and the last working mode appears on the screen.
Press and hold the [

Mute

/VOL/
Press [ MUTE] knob to mute the volume from the unit. Press again to restore the volume.
Adjusting the volume or using any of the audio setup features cancels the mute function.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through
the Setup menu.

Playing Source Selection

Press the [ MENU ] button on the front panel to display the playing
source menu.
1. or : Touch to view the previous or next page of playing
sources.
2. Custom: Touch to access Equalizer level settings menu.
3. Playing source icon: Touch to access corresponding work mode.
4. Settings: Touch to access system settings menu.

Volume Adjustment

To increase or decrease the volume level, turn the [
MUTE] knob on the front panel. The volume range is from "0" to
"50". The screen displays the volume level for 3 seconds.

EQ Menu

The Audio Control feature allows you to easily adjust your audio
system to meet the acoustical characteristics of your vehicle, which
vary depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of the
cabin equalizer.

Basic Operations

MUTE] knob on the unit to turn the unit on. The buttons on the front of the unit
/VOL/
MUTE] knob to turn off the unit.
/VOL/
EN-7
1
3
4
2
1