Metz 20 TM 52 Bedienungsanleitung Seite 50

Setting Brightness
• As you enter the picture menu, Brightness
will be the first item.
• Press “ ” button to increase brightness.
• Press “ ” button to decrease brightness.
Setting Contrast
• Using “ ” or “ ” button select Contrast.
• Press “ ” button to increase contrast level.
• Press “ ” button to decrease contrast level.
Setting Colour
• Using “ ” or “ ” button select Colour.
• Press “ ” button to increase colour level.
• Press “ ” button to decrease colour level.
Setting Sharpness
• Using “ ” or “ ” button select Sharpness.
LFWXUH
LFWXUH
LFWXUH
• Press “ ” button to increase peaking level.
• Press “ ” button to decrease peaking level.
Setting Picture Mode:
• Using “ ” or “
Mode.
• Press “ ” or “ ” button to set Picture Mode.
Picture Mode can be set to Auto, 4:3 or 16:9.
Setting Noise Reduction
• Using “ ” or “ ” button select Noise Re-
duction.
• Press “ ” or “ ” button to select Noise Re-
duction level “Off” or “Minimum” or “Me-
dium” or “Maximum” then select “store” and
press “ ” or “ ” button to save your set-
ting.
Note 1:
At low signal level, the changings on the Noise Reduc-
tion function are not effective when there is menu on the
screen. If the menu is removed, the effect of this func-
tion is seen. At normal broadcasting, Noise Reduction
changings are effective at once.
Note 2:
At moving pictures, while Noise Reduction is at maxi-
mum level, some picture distortions may occur. If Noise
Reduction is set to medium or minimum, the picture will
improve.
- 46 -
LFWXUH
” button select Picture
LFWXUH