Switching It On For The First Time - Noxon iRadio 400+ Bedienungsanleitung

NOXON iRadio 400+/460+
(e.g. 192.168.0.1) in your Web browser for it to display a convenient user interface giving
you access to all of the router's options.
Caution – we are here: SSID broadcast (WLAN)
As explained in the technical glossary, the abbreviation SSID stands for the network
name sent out to all wireless network devices within range, informing them of the pres-
ence of a network with this identification. Some routers, however, have an option to
suppress the broadcast of the network name. The option is a toggle that is usually called
SSID broadcast. If the broadcast is disabled, you must know the name in order to enter
it manually when setting up the NOXON.
Device ID: the MAC address
The so-called MAC address is a unique identifier assigned to all network devices. The
MAC address is permanently assigned to the device and cannot be modified. It can
therefore be used to configure routers to permit only devices with specific MAC address-
es to access the network or the Internet. In such a case, it will be necessary to configure
the router with the NOXON's MAC address so that it will be able to establish a network
connection and access data in the network. The address can be found on a label on the
back of the NOXON.
Sometimes required: a fixed IP
Under certain circumstances, it can be useful for a device to always have the same
address. Most networks these days are set up to assign the so-called IP address - the
identifier for the TCP/IP protocol - dynamically. In other words, the first time a device con-
nects, the so-called DHCP server assigns it a valid IP address which the device will keep
as long as the address is not needed elsewhere.
This occurs completely automatically, without the user's knowledge. If a network
is based on static IPs - i.e. fixed addresses, rather than dynamically assigned ones
- there will generally be a precise set of rules governing the addresses that can be
assigned. And our friend the NOXON also has such an IP address. If the network
requires a fixed address, the rules for assigning them must be known. But once
again, a fixed IP is really the exception; generally, everything happens automatically.

Switching it on for the first time

To start the NOXON, press the ON/OFF button on the NOXON.
Setup wizard
Start now?
YES
66
After switching on the device, you enter the setup
wizard, which helps you set up your NOXON iRa-
dio.
NO