Software-Update - Noxon iRadio 400+ Bedienungsanleitung

Factory settings
Factory reset
Proceed?
YES
Software update
Nothing is so good that it can't be made even better! That is why you can update the
firmware in the NOXON iRadio.
Software update
Auto-check setting
Check now
NOTE: In a firmware update, all the settings you have configured (e.g. network profiles,
favourite stations, equaliser settings) are lost. Therefore, you have to configure them
again after the update.
Setup wizard
Setup wizard
Start now?
YES
Menu interval
Here you adjust the delay time for switching from list to playback view.
Device Info
This menu displays all device-relevant information. There, you find the installed firmware
version and the hardware ID of your NOXON iRadio. The information found here is also
very helpful in a support case. Press the Back button to return to the settings.
There are moments when you just want to reset
everything and start over from the beginning. And
at some point, you may feel the need to do so on
your NOXON iRadio. However, this is much easier
here than in other areas of life. Most importantly,
we provide a security prompt that allows you to
NO
turn back when this window appears after you se-
lect this menu item.
If you call up this menu, the iRadio connects to the
update server and checks for any updates. After-
wards, you can install these or view additional in-
formation. Following successful installation, the
system restarts. If you do not want to always have
to do this manually, select [Auto-check setting]. If
you would rather do it yourself from time to time,
click [Check now].
Do you want to start again from the beginning and
reset the date and network connections? Just
start the setup wizard again!
NO
61